Skip to content
Tips on proper methods for loading and securing machines and their components for safe transport.
These are things that are known and practiced, but sometimes overlooked:
- Always ensure adequate clearances (i.e. power lines and other obstructions) prior to loading machinery.
- Always read and understand the operation and maintenance manual for the machinery being loaded.
- Check for fluid leaks.
- Always measure your load and check regulations for height, weight and width restrictions.
- Always inspect all anchor points and tie-down locations for visible signs of damage. Verify the trailer floor is serviceable.
- Always wear the appropriate personal protective equipment (PPE) when in, on or around any machine.
- Always wear your seatbelt.
- Eye contact should be maintained by the operator and all around the machine.
- Keep anyone not involved in the loading away from the area.
- Make sure the machine is balanced. Accurate weights are necessary to ensure the machine is properly placed or positioned on the trailer for transporting.
- Lower all attachments to their lowest possible position. If attachments cannot be lowered, lock/ bind attachments in the transport position (e.g. the centre lock pin for a backhoe loader).
- Lock the transmission in neutral and apply the parking break.
- Make sure the machine is off and key removed.
- Always use a measuring pole from the ground to the highest point on the machine when loaded on the trailer.
- Always calculate total weight and measure total width and length of load.
- If required, be sure to flag the machine prior to transport.